Posted inAccessories Engineering Workshop
Bench-A-Go-Go
The final workbench is now ready to be installed into the Workshop. I have all three painted up and in use. For £50, these were a bargain. Check out my…
Posted inWorkshop
Loose Screws
Continuing on with my quest for a great workshop, I was sorting through fixings when I began separating nails and screws in a large red box. With bins on the…
The Quick Roller Fix
There are many different applications that I intend to install in my workshop, but one of the simplest ones, is a place to put the roll of paper for wiping…
Posted inRefurbishments
The Tack Room Refurb – Hours 14-17
So, I have managed another few hours on the project and I have almost completed the first of the four furniture pieces. I headed over with less tools, this time,…
Posted inProjects
My Flight-Rig Project
2024: This was a blog post made in 2019 and I wanted to bring it to the site. I have melded two articles together. I have not been flying for…
Posted inRefurbishments
The Tack Room Refurb – Hours 8-13
Another day of building was here and I made my way over to the stables. Between 10am and 3pm, I carried on the endeavour of pigeon-holing the boot shelves. This…
Posted inRefurbishments
The Tack Room Refurb – Rough Plan
As promised, here is a plan out of the phases. I predict that each phase will take up to 15 hours to complete. The phases break down, as follows: Phase…
Posted inPower Tools Refurbishments
The Tack Room Refurb – Hours 1-7
And so it begins... So, I finally got started on refitting the Tack Room at the stables. This has been discussed for more than a year and I had yet…
Posted inAll_Access Sim-Deck
Project: Sim-Deck
I wanted to introduce another project idea. This has been brewing for more than a decade. I have never really pushed it, but I always come back to it and…
Posted in3D Projects Technology
Creating 3D Models
Over the years I have taken time to learn the basics of using an Open-Source program, called Blender. I wanted to create my own models that would sit in Unity…